No Products in the Cart
Perfomance Protective Covers
Click Here For Installation Guide.
|
PROTECTIVE |
Durable, breathable, quality material protects painted surface from common daily wear without damaging clear-coat paint finish. |
|
TIGHT FIT |
Stretchable fabric allows for a tight, secure, contoured fit around front bumper. |
|
COMPACT SIZE AND WASHABLE |
Unique material and design allows for easy cleaning, quick drying and compact storage when not in use. |
|
EASY INSTALLATION AND REMOVAL |
Our fastening system allows for quick and easy installation and removal of the mask with no cutting, drilling or permanent alteration to the vehicle required. |
NO!!NoviStretch covers are specifically designed for incredible ease of installation and removal. Our products can be installed in around one minute or less after the car has been initially prepped to accept the product. This is one of many features of the product unmatched by the alternative protective covers currently on the market.
No! NoviStretch products are specifically designed to prevent damage to the clear coat on today’s painted finishes. The tight fit, the material and method of our fabrication eliminate fluttering and seams that are an inherent part of the more traditional vinyl or leather covers. In addition there are no “cutouts” on our mask that allow grit and other foreign material to get between the mask and the car’s finish.
NoviStretch covers are constructed from synthetic stretch fabric that will not chaff or damage the painted surface and have been designed to perform in all weather & road conditions.
It is important that the painted surface be clean prior to installation of the cover. Over time and with use, dirt or dust, may work its way between the cover and the painted surface. Regular cleaning of both the cover & surface is essential to provide proper protection. Severe weather conditions or travel on off-road surfaces increase the recommended frequency for inspection and cleaning.
It is expected to see some cosmetic damage (small holes, thinning, fading or discoloration) to the mask over time & miles as it does its job. However, proper care will maximize product life.
YES!NoviStretch products do not trap moisture and therefore there is no problem using the mask in the rain. Because the mask material is porous, it breathes and dries quickly and completely.
YES!The NoviStretch mask with its use of stretch fabric technology has the benefit of being able to expand to accommodate most front end modification, including the addition of ground effects, etc.
YES!The NoviStretch mask does prevent minor damage to the vehicles finish that might otherwise occur if you were not using the mask. Our customer’s experience with the product has provided much empirical data about incidents where the mask has prevented damage from road debris. While it wont stop a large stone from damaging your vehicle, it will keep it protected from the everyday bits of debris, road tar, bugs, tree sap and other hazards you encounter with normal daily use.
NO!!The NoviStretch mask is designed to allow for sufficient airflow and keep the car from overheating despite the fact that there are no “cutouts” for the grill opening. This also means that the mask is filtering out bugs and debris that would otherwise end up in the radiator cooling fins.
NO!!NoviStretch products use innovative attachment systems that eliminate the need to permanently alter your vehicle in any way to use the product. Installation is quick, easy and completely reversible.
Yes!!The NoviStretch mask is designed to allow the front license plate to be installed over/through the mask after the mask has been placed on the car. Piercing the fabric with the screws for mounting the plate will not cause the material to “run” when installed in this fashion.
YES!YES! All NoviStretch products are covered by a one-year limited warranty. This warranty covers unexpected or premature failure of the product due to material or workmanship failure. See our warranty for details.
The life of NoviStretch Performance Protective Covers will vary by customer use, however our customers typically experience a 2-3 year life.
Our Patented designs employs stretch fabric technology creating a truly superior automotive front-end protective cover. Unlike the traditional vinyl or leather mask, The NoviStretch mask fits tight to the contours of the car, has no cutouts or seams that can cause abrasion to the cars finish. It is extremely easy to use and care for. The NoviStretch mask is also less costly than the clear protective film applications
The NoviStretch mask is 100% manufactured in the United States using domestic and imported parts.
Fits 2005–2013 C6 Base Model Coupe & Convertible Only. $139.
Important: This mask is designed for the C6 Base Model Coupe and Convertible only. It does not fit the C6 Grand Sport, Z06, or 427, those models have a wider, more aggressive front fascia and require the C6 Z06/Grand Sport/427 mask (FBM655V). Confirm your trim before ordering.
The C6 Corvette's refined, aerodynamic front fascia represented a significant evolution from the C5, cleaner lines, lower stance, and a more aggressive presence that made America's sports car feel genuinely world-class for the first time. That precision front end deserves protection that matches it. Rock chips, bug impacts, road tar, and UV damage attack the C6's painted bumper every mile, and a car now ranging from 12 to 20 years old deserves active defense against the daily wear that compounds over time. The NoviStretch® C6 Corvette Base Model Front Bumper Mask (FBM650V) wraps tight against the C6's full front fascia using proprietary synthetic stretch-mesh fabric that conforms to every contour without gaps, seams, or cutouts that allow debris to work its way against the clear coat. The patented Snap and Strap© hardware locks the mask securely at highway speeds using all-black "hidden" fasteners that disappear against the fascia, keeping the C6's sleek factory lines completely intact. No drilling, no cutting, no permanent modification to your Corvette, ever. Every mask ships with all hardware included and is 100% manufactured in the USA, backed by a 12-month limited warranty.
Fitment: All 2005–2013 C6 Corvette Base Model Coupe and Convertible only. This mask does not fit the C6 Grand Sport, Z06, or 427, those models require the FBM655V.
Key Features:
Installation note: The bottom mounting screws on the C6 are located approximately 10 inches back from the front edge of the bumper in slightly recessed wells, they are easy to overlook during initial setup. Review the full FBM650V Installation Guide carefully before beginning. After the 15-minute initial setup, the mask installs and removes in under one minute. Real-world C6 fitment photos in the Customer Gallery.
The C6's lower, more sculpted fascia is tighter to the ground than the C5 it replaced, and that lower profile means rocks and road debris have a direct trajectory into the painted front bumper at highway speeds. Traditional vinyl bras don't conform to the C6's precise body lines; they gap at the outer edges of the bumper, creating debris entry points and pressure zones that abrade the paint underneath. Non-breathable materials trap heat and moisture against the clear coat, accelerating the UV damage and blistering that shows up earliest on the C6's popular Jetstream Blue, Atomic Orange, and Crystal Red Metallic finishes. NoviStretch® solves every one of those problems. The stretch-mesh fabric fills the full width of the C6's front fascia without seams or cutouts, there is no exposed edge where debris can enter. The porous material breathes freely in all conditions, so heat and moisture escape rather than building up beneath the mask. The Snap and Strap© system holds the mask at highway speeds without any hardware that contacts the painted surface. After the initial 15-minute setup, the mask is on and off in under a minute, practical for owners who want highway protection but prefer a clean look at the track or car shows. Pair the FBM650V with the MC150 Mirror Covers for complete C6 front-end protection. Browse the full Corvette collection for all available Corvette covers.
The FBM650V fits all 2005–2013 C6 Corvette Base Model Coupe and Convertible across every model year, but it is critical to confirm your trim before ordering. The C6 Grand Sport, Z06, and 427 have a distinctly wider and more aggressive front fascia that requires the dedicated C6 Z06/Grand Sport/427 mask (FBM655V). Ordering the wrong mask for your C6 trim is the most common fitment mistake on this vehicle, the FBM650V will not properly fit a Grand Sport, Z06, or 427 front end. Always confirm your exact trim in the product listing before ordering. For a C5 (1997–2004), order the C5 Front Bumper Mask (FBM550V). For a C7 (2014–2019), see the C7 Front Bumper Mask. Complete your C6's front-end protection by pairing with the MC150 Mirror Covers, which fit all C5, C6, and C7 Corvettes and 5th Gen Camaros. Need a replacement hardware kit? Questions? Visit the Support page or review the Installation Guides.
No. The FBM650V is designed specifically for the C6 Base Model Coupe and Convertible only. The Grand Sport, Z06, and 427 have a wider, more aggressive front fascia that requires the dedicated C6 Z06/Grand Sport/427 mask (FBM655V). Ordering the wrong mask for your C6 trim is the most common fitment error on this vehicle, always confirm your trim before purchasing.
The easiest way to confirm is to check your window sticker, title, or VIN decoder for the trim designation. Visually, the Grand Sport, Z06, and 427 have wider front fenders and a noticeably more aggressive, wider front fascia than the Base Model. If you are unsure, contact the Support team before ordering.
Yes. The FBM650V fits both the C6 Base Model Coupe and Convertible across all model years from 2005 through 2013. The front fascia profile is the same on both body styles in the Base Model trim.
The C6 pairs with the MC150 Mirror Covers, which fit all C5, C6, and C7 Corvettes as well as 5th Gen Camaros. The C6's mirror housings are symmetrical, the driver and passenger side covers are interchangeable.
The first installation requires approximately 15 minutes to complete as the snap-head screws from the hardware kit are installed on the car. Note: the bottom mounting screws on the C6 are located approximately 10 inches back from the front edge of the bumper in slightly recessed wells, review the FBM650V Installation Guide carefully to avoid missing them. After the one-time setup, the mask installs and removes in under one minute.
Yes. Every NoviStretch® front bumper mask ships with a complete Snap and Strap© hardware kit. If you ever need replacements, hardware kits are available separately for $4.75.
No. The synthetic stretch-mesh fabric is soft and non-abrasive and will not scratch or chaff the clear coat. There are no cutouts or seams that allow grit to enter and abrade the finish. The breathable construction prevents heat and moisture buildup beneath the mask. Always clean the painted surface thoroughly before installation and inspect regularly.
No. The NoviStretch® mask allows sufficient airflow despite having no grille cutout and actively filters bugs and road debris from the radiator cooling fins rather than blocking them, important for the C6's LS2 and LS3 engines that benefit from unobstructed cooling airflow.
Yes. The porous stretch-mesh material is weather-resistant and dries quickly. Remove before pressure washing to protect the mask and hardware longevity.
Every NoviStretch® mask carries a 12-month limited warranty against manufacturing defects. Full details are on the Warranty Information page. Customers typically experience a product life of 2–3 years with proper care.
Pair the FBM650V with the MC150 Mirror Covers for complete C6 Base Model front-end coverage, they fit all C5, C6, and C7 Corvettes and 5th Gen Camaros, sold as a pair for $49. Have a C6 Grand Sport, Z06, or 427? Order the FBM655V instead. Browse all NoviStretch® Corvette covers, C4, C5, C6 Base, C6 Z06/Grand Sport/427, C7, and C8, and the full NoviStretch® lineup: Camaro (5th & 6th Gen), Mustang (5th, 6th & 7th Gen), Challenger, Charger, Chrysler 300, Dodge Magnum, and Harley-Davidson. All NoviStretch® products are 100% USA-made, ship with all hardware included, and are backed by a 12-month limited warranty.
