No Products in the Cart
Perfomance Protective Covers
Harley-Davidson Touring riders invest serious money in their paint, and the hard bag lids are some of the most exposed surfaces on the bike. Every highway mile brings rock chips, bug splatter, road grime, and UV fade directly to those painted lids. NoviStretch® hard bag lid covers protect that finish using the same proprietary synthetic stretch-mesh fabric trusted by Corvette, Mustang, and Camaro owners for front bumper protection. Each cover forms a tight, contoured layer over the lid, held in place by heavy-duty elastic trim with no cutting, no drilling, and no permanent alteration to your motorcycle. Every set is 100% manufactured in the USA, backed by a 12-month limited warranty, and sold as a pair, one cover per bag, so both lids are protected in a single order. Keep your Touring bike looking show-quality, mile after mile.
A single SKU covers every Harley-Davidson Touring motorcycle equipped with hard bags, Road Glide, Street Glide, Road King, Electra Glide, Ultra Classic, and all other Touring models with factory hard saddlebags. The synthetic stretch-mesh fabric flexes over the contoured lid surface for a tight, seam-free fit that stays put at highway speeds without any hardware. The breathable construction prevents moisture from building up beneath the cover, protecting the clear coat from the heat and humidity that accelerate paint damage over time—machine washable and quick-drying for easy maintenance on the road. See the LC100HD Installation Guide for step-by-step instructions before installing.
Hard bag lids take a beating that most riders underestimate. At highway speeds, rock chips and road debris hit the lids at the same velocity they'd hit a car bumper, and the broad, flat surface of a painted hard bag lid gives them nowhere to deflect. Traditional vinyl covers and aftermarket bag guards either don't cover the full lid surface, create pressure points that trap grit and mar the paint over time, or require permanent hardware that voids warranties and damages finishes. NoviStretch® solves every one of those problems. The stretch-mesh fabric wraps the entire lid surface without seams or cutouts that allow debris to sneak underneath. It breathes freely so heat and moisture escape rather than blistering the clear coat. The stretch installation system locks the cover in place with no tools and no modification to the bike, on and off in under a minute, reversible at any time. See real Harleys wearing NoviStretch® covers in the Customer Gallery.
The NoviStretch® hard bag lid cover fits all Harley-Davidson Touring motorcycles equipped with factory hard bags. This includes Road Glide, Street Glide, Road King, Electra Glide Classic, Ultra Limited, and all other Touring-platform models across all model years. One pair covers both the left and right saddlebag lids. Always confirm fitment in the product listing before ordering. If you also ride with a fairing, pair the lid covers with the NoviStretch® Harley-Davidson Fairing Mask for complete front-to-back paint protection. Questions? Visit the Support page or review the Installation Guides.
The covers fit all Harley-Davidson Touring motorcycles equipped with hard bags, Road Glide, Street Glide, Road King, Electra Glide, Ultra Limited, and all other Touring-platform models with factory saddlebags, across all model years.
They are sold as a set, one pair per order, covering both the left and right hard bag lids.
No. The stretch installation system allows the cover to be pulled over the lid and adjusted by hand. No cutting, drilling, or permanent modification to the motorcycle is required. Installation takes under a minute.
No. The synthetic stretch-mesh fabric is soft and non-abrasive and will not scratch the clear coat. The breathable, porous material prevents heat and moisture from building up beneath the cover, the primary cause of paint damage under non-breathable vinyl covers.
Yes. The stretch-mesh is porous and weather-resistant. It breathes and dries quickly, so moisture does not get trapped against the painted lid surface. Remove before pressure washing to protect the cover itself.
Yes. Heavy-duty elastic trim holds each cover securely over the lid at highway speeds. Always confirm the fit is snug and even before any extended high-speed riding.
Yes. Wash on a gentle cycle in cold water and air dry. Avoid bleach and fabric softeners to preserve the elastic and extend the life of the covers.
Yes. The lid covers pair directly with the NoviStretch® Harley-Davidson Fairing Mask for complete front-to-back coverage on any Touring motorcycle equipped with a Bat-Wing fairing and hard bags.
Every NoviStretch® lid cover set is backed by a 12-month limited warranty against manufacturing defects. Full details are on the Warranty Information page. Customers typically see a product life of 2–3 years with proper care.
All NoviStretch® products are 100% manufactured in the United States using domestic and imported parts.
NoviStretch® precision-fit protective covers are available for the Corvette (C4–C8), Camaro (5th & 6th Gen), Mustang (5th, 6th & 7th Gen), Challenger, Charger, Chrysler 300, and Dodge Magnum. Stretch-mesh mirror covers are also available for most of these platforms. All covers are 100% USA-made with the same patented protection technology.
Same template as the Chrysler 300 and Mirror Covers pages, intro with the key product pitch, H2 product section with H3 linking directly to the product with price, a "Why Choose" section, a fitment guide with a natural cross-sell to the Fairing Mask, 10 FAQs, and a full cross-sell footer. The one-product collection is handled cleanly by leaning into the Harley ecosystem (fairing mask cross-sell) and the broader NoviStretch lineup for internal link depth.
