No Products in the Cart
Perfomance Protective Covers
Click Here For Installation Instructions.
|
PROTECTIVE |
Durable, breathable, quality material protects painted surface from common daily wear without damaging clear-coat paint finish. |
|
TIGHT FIT |
Stretchable fabric allows for a tight, secure, contoured fit around front bumper. |
|
COMPACT SIZE AND WASHABLE |
Unique material and design allows for easy cleaning, quick drying and compact storage when not in use. |
|
EASY INSTALLATION AND REMOVAL |
Our fastening system allows for quick and easy installation and removal of the mask with no cutting, drilling or permanent alteration to the vehicle required. |
NO!!NoviStretch covers are specifically designed for incredible ease of installation and removal. Our products can be installed in around one minute or less after the car has been initially prepped to accept the product. This is one of many features of the product unmatched by the alternative protective covers currently on the market.
No! NoviStretch products are specifically designed to prevent damage to the clear coat on today’s painted finishes. The tight fit, the material and method of our fabrication eliminate fluttering and seams that are an inherent part of the more traditional vinyl or leather covers. In addition there are no “cutouts” on our mask that allow grit and other foreign material to get between the mask and the car’s finish.
NoviStretch covers are constructed from synthetic stretch fabric that will not chaff or damage the painted surface and have been designed to perform in all weather & road conditions.
It is important that the painted surface be clean prior to installation of the cover. Over time and with use, dirt or dust, may work its way between the cover and the painted surface. Regular cleaning of both the cover & surface is essential to provide proper protection. Severe weather conditions or travel on off-road surfaces increase the recommended frequency for inspection and cleaning.
It is expected to see some cosmetic damage (small holes, thinning, fading or discoloration) to the mask over time & miles as it does its job. However, proper care will maximize product life.
YES!NoviStretch products do not trap moisture and therefore there is no problem using the mask in the rain. Because the mask material is porous, it breathes and dries quickly and completely.
YES!The NoviStretch mask with its use of stretch fabric technology has the benefit of being able to expand to accommodate most front end modification, including the addition of ground effects, etc.
YES!The NoviStretch mask does prevent minor damage to the vehicles finish that might otherwise occur if you were not using the mask. Our customer’s experience with the product has provided much empirical data about incidents where the mask has prevented damage from road debris. While it wont stop a large stone from damaging your vehicle, it will keep it protected from the everyday bits of debris, road tar, bugs, tree sap and other hazards you encounter with normal daily use.
NO!!The NoviStretch mask is designed to allow for sufficient airflow and keep the car from overheating despite the fact that there are no “cutouts” for the grill opening. This also means that the mask is filtering out bugs and debris that would otherwise end up in the radiator cooling fins.
NO!!NoviStretch products use innovative attachment systems that eliminate the need to permanently alter your vehicle in any way to use the product. Installation is quick, easy and completely reversible.
Yes!!The NoviStretch mask is designed to allow the front license plate to be installed over/through the mask after the mask has been placed on the car. Piercing the fabric with the screws for mounting the plate will not cause the material to “run” when installed in this fashion.
YES!YES! All NoviStretch products are covered by a one-year limited warranty. This warranty covers unexpected or premature failure of the product due to material or workmanship failure. See our warranty for details.
The life of NoviStretch Performance Protective Covers will vary by customer use, however our customers typically experience a 2-3 year life.
Our Patented designs employs stretch fabric technology creating a truly superior automotive front-end protective cover. Unlike the traditional vinyl or leather mask, The NoviStretch mask fits tight to the contours of the car, has no cutouts or seams that can cause abrasion to the cars finish. It is extremely easy to use and care for. The NoviStretch mask is also less costly than the clear protective film applications
The NoviStretch mask is 100% manufactured in the United States using domestic and imported parts.
Fits 2005–2013 C6 Grand Sport, Z06 & 427 Only. $149.
Important: This mask is designed specifically for the C6 Grand Sport, Z06, and 427's wider, more aggressive front fascia. It does not fit the C6 Base Model Coupe or Convertible, those models require the C6 Base Model mask (FBM650V). Confirm your trim before ordering.
The C6 Grand Sport, Z06, and 427 represent the apex of the sixth-generation Corvette, wider fenders, a more aggressive front fascia, and performance credentials that made them genuinely competitive with the world's best sports cars. That wider, more sculpted front end sets these trims apart visually from the Base Model, and it demands a mask engineered specifically for its profile. Rock chips, road debris, bug impacts, and UV damage hit the Z06's low front end at full highway velocity every mile, and on a high-performance car whose front fascia is as much a functional aerodynamic surface as a cosmetic one, paint damage is both visually costly and potentially expensive to address correctly. The NoviStretch® C6 Z06/Grand Sport/427 Front Bumper Mask (FBM655V) was built specifically for this fascia, proprietary synthetic stretch-mesh fabric that conforms tight to the C6 performance models' wider front bumper without gaps, seams, or cutouts that allow debris to work its way against the clear coat. The patented Snap and Strap© hardware locks the mask securely at highway speeds using all-black "hidden" fasteners that disappear against the fascia. No drilling, no cutting, no permanent modification to your Corvette, ever. Every mask ships with all hardware included and is 100% manufactured in the USA, backed by a 12-month limited warranty.
Fitment: All 2005–2013 C6 Grand Sport, Z06, and 427 Corvettes across every model year. This mask does not fit the C6 Base Model Coupe or Convertible, those models require the FBM650V.
Key Features:
See the FBM655V Installation Guide for full step-by-step instructions before installing. After the 15-minute initial setup, the mask installs and removes in under one minute. Real-world C6 performance model fitment photos in the Customer Gallery.
The C6 performance models' wider front fascia is one of the most aerodynamically purposeful front ends Chevrolet ever produced, and it's also one of the most exposed. The Z06's low ground clearance means the front bumper sits closer to road debris than virtually any other production car's. At highway speeds, the full force of rock chips, road tar, and bug impacts hits that painted surface directly, and on a car whose LS7 or LS9 engine represents a significant performance investment, protecting the finish that frames that powertrain is part of protecting the entire package. Traditional vinyl bras fail the C6 performance models in two specific ways: they don't conform to the wider fascia correctly, leaving gap-prone edges where debris enters, and their non-breathable construction traps heat against the clear coat, a particularly damaging combination for a high-output engine bay that already generates substantial underhood temperatures. NoviStretch® eliminates both failure modes. The stretch-mesh fabric fills the full width of the Grand Sport/Z06/427 fascia without seams or cutouts, covering the entire surface that the wider fenders expose. The porous material breathes freely so heat and moisture escape rather than building up beneath the mask, maintaining the clear coat integrity that track-day and weekend drivers need their car to hold over years of spirited use. And because installation and removal take under a minute after initial setup, the mask goes on for highway transit and comes off for track sessions without any tools or hassle. Pair the FBM655V with the MC150 Mirror Covers for complete C6 performance model front-end protection. Browse the full Corvette collection for all available covers.
The FBM655V fits all 2005–2013 C6 Grand Sport, Z06, and 427 Corvettes across every model year, but confirming your exact trim before ordering is critical. The C6 Base Model Coupe and Convertible have a narrower front fascia that requires the FBM650V. Installing the wrong mask on a C6 is the most common fitment error in the NoviStretch® Corvette lineup, the FBM655V will not properly fit a Base Model front end, and the FBM650V will not properly fit a Grand Sport, Z06, or 427. If you are unsure which trim you have, check your window sticker, title, or VIN decoder, or contact the Support team before ordering. For a C7 (2014–2019), see the C7 Front Bumper Mask. Complete your C6 performance model's front-end protection by pairing with the MC150 Mirror Covers, which fit all C5, C6, and C7 Corvettes and 5th Gen Camaros. Need a replacement hardware kit? Questions? Visit the Support page or review the Installation Guides.
No. The FBM655V is designed specifically for the C6 Grand Sport, Z06, and 427's wider front fascia. The C6 Base Model Coupe and Convertible require the FBM650V. Ordering the wrong mask for your C6 trim is the most common fitment error in the NoviStretch® Corvette lineup, always confirm your trim before purchasing.
The Grand Sport, Z06, and 427 have noticeably wider front fenders and a wider, more aggressive front fascia than the Base Model, the visual difference is significant. You can also confirm by checking your window sticker, title, or VIN decoder for the trim designation. If you are still unsure, contact the Support team before ordering.
Yes. The FBM655V covers all three C6 performance trim levels, Grand Sport, Z06, and 427, in a single SKU across all model years from 2005 through 2013. All three share the same wider front fascia profile that distinguishes them from the Base Model.
The C6 performance models pair with the MC150 Mirror Covers, which fit all C5, C6, and C7 Corvettes as well as 5th Gen Camaros. The C6's mirror housings are symmetrical, the driver and passenger side covers are fully interchangeable.
The first installation requires approximately 15 minutes to complete as the snap-head screws from the hardware kit are installed on the car. After that one-time setup, the mask installs and removes in under one minute, practical for owners who put it on for highway drives and remove it for track sessions. Full instructions are in the FBM655V Installation Guide.
Yes. Every NoviStretch® front bumper mask ships with a complete Snap and Strap© hardware kit, everything required for the initial setup and all subsequent installations. If you ever need replacements, hardware kits are available separately for $4.75.
No. The synthetic stretch-mesh fabric is soft and non-abrasive and will not scratch or chaff the clear coat. There are no cutouts or seams that allow grit to enter and abrade the finish underneath. The breathable construction prevents heat and moisture buildup beneath the mask. Always clean the painted surface thoroughly before installation and inspect regularly, particularly important on a high-performance Corvette where paint condition is part of the car's overall presentation.
No. The NoviStretch® mask is designed to allow sufficient airflow despite having no grille cutout. It actively filters bugs and road debris from the radiator cooling fins rather than blocking them, an important benefit for the Z06's high-output LS7 and LS9 engines that generate significant underhood heat and depend on unobstructed airflow for sustained performance.
Yes. The porous stretch-mesh material is weather-resistant and dries quickly, so moisture does not get trapped against the paint. Remove before pressure washing to protect the mask and hardware longevity.
Every NoviStretch® mask carries a 12-month limited warranty against manufacturing defects. Full details are on the Warranty Information page. Customers typically experience a product life of 2–3 years with proper care.
Pair the FBM655V with the MC150 Mirror Covers for complete C6 Grand Sport/Z06/427 front-end coverage, they fit all C5, C6, and C7 Corvettes and 5th Gen Camaros, sold as a pair for $49. Have a C6 Base Model? Order the FBM650V instead. Browse all NoviStretch® Corvette covers, C4, C5, C6 Base, C6 Z06/Grand Sport/427, C7, and C8, and the full NoviStretch® lineup: Camaro (5th & 6th Gen), Mustang (5th, 6th & 7th Gen), Challenger, Charger, Chrysler 300, Dodge Magnum, and Harley-Davidson. All NoviStretch® products are 100% USA-made, ship with all hardware included, and are backed by a 12-month limited warranty.
