No Products in the Cart
Perfomance Protective Covers
Click Here For Installation Instructions.
|
PROTECTIVE |
Durable, breathable, quality material protects painted surface from common daily wear without damaging clear-coat paint finish. |
|
TIGHT FIT |
Stretchable fabric allows for a tight, secure, contoured fit around front bumper. |
|
COMPACT SIZE AND WASHABLE |
Unique material and design allows for easy cleaning, quick drying and compact storage when not in use. |
|
EASY INSTALLATION AND REMOVAL |
Our fastening system allows for quick and easy installation and removal of the mask with no cutting, drilling or permanent alteration to the vehicle required. |
NO!!NoviStretch covers are specifically designed for incredible ease of installation and removal. Our products can be installed in around one minute or less after the car has been initially prepped to accept the product. This is one of many features of the product unmatched by the alternative protective covers currently on the market.
No! NoviStretch products are specifically designed to prevent damage to the clear coat on today’s painted finishes. The tight fit, the material and method of our fabrication eliminate fluttering and seams that are an inherent part of the more traditional vinyl or leather covers. In addition there are no “cutouts” on our mask that allow grit and other foreign material to get between the mask and the car’s finish.
NoviStretch covers are constructed from synthetic stretch fabric that will not chaff or damage the painted surface and have been designed to perform in all weather & road conditions.
It is important that the painted surface be clean prior to installation of the cover. Over time and with use, dirt or dust, may work its way between the cover and the painted surface. Regular cleaning of both the cover & surface is essential to provide proper protection. Severe weather conditions or travel on off-road surfaces increase the recommended frequency for inspection and cleaning.
It is expected to see some cosmetic damage (small holes, thinning, fading or discoloration) to the mask over time & miles as it does its job. However, proper care will maximize product life.
YES!NoviStretch products do not trap moisture and therefore there is no problem using the mask in the rain. Because the mask material is porous, it breathes and dries quickly and completely.
YES!The NoviStretch mask with its use of stretch fabric technology has the benefit of being able to expand to accommodate most front end modification, including the addition of ground effects, etc.
YES!The NoviStretch mask does prevent minor damage to the vehicles finish that might otherwise occur if you were not using the mask. Our customer’s experience with the product has provided much empirical data about incidents where the mask has prevented damage from road debris. While it wont stop a large stone from damaging your vehicle, it will keep it protected from the everyday bits of debris, road tar, bugs, tree sap and other hazards you encounter with normal daily use.
NO!!The NoviStretch mask is designed to allow for sufficient airflow and keep the car from overheating despite the fact that there are no “cutouts” for the grill opening. This also means that the mask is filtering out bugs and debris that would otherwise end up in the radiator cooling fins.
NO!!NoviStretch products use innovative attachment systems that eliminate the need to permanently alter your vehicle in any way to use the product. Installation is quick, easy and completely reversible.
Yes!!The NoviStretch mask is designed to allow the front license plate to be installed over/through the mask after the mask has been placed on the car. Piercing the fabric with the screws for mounting the plate will not cause the material to “run” when installed in this fashion.
YES!YES! All NoviStretch products are covered by a one-year limited warranty. This warranty covers unexpected or premature failure of the product due to material or workmanship failure. See our warranty for details.
The life of NoviStretch Performance Protective Covers will vary by customer use, however our customers typically experience a 2-3 year life.
Our Patented designs employs stretch fabric technology creating a truly superior automotive front-end protective cover. Unlike the traditional vinyl or leather mask, The NoviStretch mask fits tight to the contours of the car, has no cutouts or seams that can cause abrasion to the cars finish. It is extremely easy to use and care for. The NoviStretch mask is also less costly than the clear protective film applications
The NoviStretch mask is 100% manufactured in the United States using domestic and imported parts.
Fits All 2014–2019 C7 Corvettes Including Z06. One SKU. $159.
Important: The FBM750V covers the Forward View Parking camera when installed. It is not intended for use with the Stage 3 (Z07) package when utilizing larger track-use winglets and end-plates that alter the front fascia profile. C7 Z06 owners with the Z07 package should contact support before ordering.
The C7 Corvette Stingray represented the most dramatic design evolution the nameplate had seen in decades, an aggressively sculpted, aerodynamically engineered front end that looked like nothing before it in the Corvette lineup. That precision front fascia, shared across every C7 trim from the base Stingray through the Z06, is also one of the most exposed painted surfaces on any modern American sports car. Rock chips, bug impacts, road tar, and UV damage accumulate on that low, wide bumper every mile, whether you're daily driving a Stingray, putting highway miles behind a Z51, or transporting a Z06 to a track day. The NoviStretch® C7 Corvette Front Bumper Mask (FBM750V) was engineered specifically for the C7's sculpted front fascia, proprietary synthetic stretch-mesh fabric that conforms tight to every contour without gaps, seams, or cutouts that allow debris to work its way against the clear coat. The patented Snap and Strap© hardware locks the mask securely at highway speeds using all-black "hidden" fasteners that disappear against the fascia, preserving the C7's dramatic factory lines completely intact. No drilling, no cutting, no permanent modification to your Corvette, ever. Every mask ships with all hardware included and is 100% manufactured in the USA, backed by a 12-month limited warranty.
Fitment: All 2014–2019 C7 Corvettes, Stingray (1LT, 2LT, 3LT), Z51, Grand Sport, Z06 (excluding Stage 3/Z07 track package with larger winglets/end-plates). Note: the mask covers the Forward View Parking camera when installed.
Key Features:
See the FBM750V Installation Guide for full step-by-step instructions before installing. After the 15-minute initial setup, the mask installs and removes in under one minute. Real-world C7 fitment photos in the Customer Gallery.
The C7's dramatically sculpted front end, with its wide, low fascia, sharp creases, and integrated aerodynamic elements, is precisely the kind of complex surface that exposes every weakness of a traditional vinyl car bra. Vinyl covers gap along the C7's sharp body line transitions, creating pressure points and debris entry zones at the outer edges of the bumper where chips and abrasion originate. Non-breathable materials trap heat and moisture against the clear coat, a particular concern on the C7's long hood and front fascia where solar heat load is significant, and on popular finishes like Shark Gray, Sebring Orange, and Blade Silver where UV-driven fade shows earliest. For C7 Z06 owners whose cars are already crossing into appreciating collector territory, protecting the original finish is part of protecting the car's long-term value. NoviStretch® solves every one of those failure modes. The stretch-mesh fabric fills the full width of the C7's front fascia without seams or cutouts, there is no exposed edge where debris can work its way against the paint. The porous material breathes freely so heat and moisture escape beneath the mask rather than building up against the clear coat. The Snap and Strap© system holds the mask at highway speeds without any hardware that contacts the painted surface. After the initial 15-minute setup, on and off in under a minute, on for the highway drive to the track, off for the session itself. Pair the FBM750V with the MC150 Mirror Covers for complete C7 front-end protection. Browse the full Corvette collection for all available covers.
The FBM750V covers the complete run of 7th Generation Corvettes in a single SKU, Stingray (1LT, 2LT, 3LT), Z51, Grand Sport, and Z06 across all model years from 2014 through 2019. One important fitment exception: the mask is not intended for use with the Stage 3 (Z07) performance package when the larger track-specific winglets and end-plates are installed, as these components alter the front fascia profile. C7 Z06 owners with the Z07 package installed should contact the support team before ordering to confirm fitment. Also note that the mask covers the C7's Forward View Parking camera when installed, remove the mask before relying on the parking camera. Always confirm your exact model year in the product listing before ordering. For a C6 (2005–2013), see the C6 Base mask (FBM650V) or C6 Z06/Grand Sport/427 mask (FBM655V). For a C8 (2020–present), see the C8 Front Bumper Mask. Complete your C7's front-end protection by pairing with the MC150 Mirror Covers, which fit all C5, C6, and C7 Corvettes and 5th Gen Camaros. Need a replacement hardware kit? Questions? Visit the Support page.
Yes. The FBM750V fits every 2014–2019 C7 Corvette across all trim levels, Stingray (1LT, 2LT, 3LT), Z51, Grand Sport, and Z06, in a single SKU. The one exception is the Z06 with the Stage 3 (Z07) package installed and larger track-spec winglets/end-plates; see below.
The FBM750V is not intended for use with the Stage 3 (Z07) package when the larger track-use winglets and end-plates are installed, as these components alter the front fascia profile beyond what the mask is designed to cover. Contact the Support team before ordering to discuss your specific configuration.
Yes. The FBM750V covers the C7's Forward View Parking camera when installed. Remove the mask before relying on the parking camera system. This is called out in the product description and is worth noting before the first installation.
The C7 pairs with the MC150 Mirror Covers, which fit all C5, C6, and C7 Corvettes as well as 5th Gen Camaros. The C7's mirror housings are symmetrical, the driver and passenger side covers are fully interchangeable.
The first installation requires approximately 15 minutes to complete as the snap-head screws from the hardware kit are installed on the car. After that one-time setup, the mask installs and removes in under one minute. Full instructions are in the FBM750V Installation Guide.
Yes. Every NoviStretch® front bumper mask ships with a complete Snap and Strap© hardware kit, everything required for the initial setup and all subsequent installations. If you ever need replacements, hardware kits are available separately for $4.75.
No. The synthetic stretch-mesh fabric is soft and non-abrasive and will not scratch or chaff the clear coat. There are no cutouts or seams that allow grit to enter and abrade the finish underneath. The breathable construction prevents heat and moisture buildup beneath the mask. Always clean the painted surface thoroughly before installation and inspect regularly, particularly important on a C7 Z06 where original paint condition is increasingly tied to collector value.
No. The NoviStretch® mask allows sufficient airflow despite having no grille cutout and actively filters bugs and road debris from the radiator cooling fins rather than blocking them, important for the C7 Z06's supercharged LT4 engine that generates significant underhood heat at sustained high performance.
Yes. The porous stretch-mesh material is weather-resistant and dries quickly, so moisture does not get trapped against the paint. Remove before pressure washing to protect the mask and hardware longevity.
Every NoviStretch® mask carries a 12-month limited warranty against manufacturing defects. Full details are on the Warranty Information page. Customers typically experience a product life of 2–3 years with proper care.
Pair the FBM750V with the MC150 Mirror Covers for complete C7 front-end coverage, they fit all C5, C6, and C7 Corvettes and 5th Gen Camaros, sold as a pair for $49. For a C6 (2005–2013), see the C6 Base mask (FBM650V) or the C6 Z06/Grand Sport/427 mask (FBM655V). For a C8 (2020–present), see the C8 Front Bumper Mask. Browse all NoviStretch® Corvette covers, C4, C5, C6 Base, C6 Z06/Grand Sport/427, C7, and C8, and the full NoviStretch® lineup: Camaro (5th & 6th Gen), Mustang (5th, 6th & 7th Gen), Challenger, Charger, Chrysler 300, Dodge Magnum, and Harley-Davidson. All NoviStretch® products are 100% USA-made, ship with all hardware included, and are backed by a 12-month limited warranty.
